Your location: Home   Products   Insulation and Sheath  0535 Cross-linkable Semi-conductive Inner Shielding Compound
0535 Cross-linkable Semi-conductive Inner Shielding Compound
0535 Cross-linkable Semi-conductive Inner Shielding Compound

0535 Cross-linkable Semi-conductive Inner Shielding Compound

  • Product Details
  • Video
  • FAQ

0535 Cross-linkable Semi-conductive Inner Shielding Compound

5961576634335309.jpg-8721576634353646.jpg

1,0535 cross-linkable semi-conductive shielding compound is used as conductor shield and bonded insulation shield for

cross-linked polyethylene insulation power cable rated voltage up to 35KV. It’s suitable for high temperature vulcanization

processing method. 0535 provides fine surface smoothness, good extruding fluidity, low pre-cure or scorch characteristic,

stable volume resistivity and compatibility with both copper and aluminum conductors, strong bonding with insulation layer.

As 0535 bonded type was added in with special additive, it has excellence compatibility with copper conductor without

formation of copper-oxidation.

2. Packing

In Cardboard Box with inner PE bag, 600kg/box.

image.png

3. Technical Parameter

Property

Test Method

Unit

Value

Density at 23°C

ASTM D 1505

g/ cm3

≤ 1.10

Tensile Strength (200 mm/min)

Tensile Strength Retention

(Heat Aging at 135°C after 168h)

ASTM D 638

MPA

%

≥ 17

85

Elongation at Break before ageing

Elongation Retention

(Heat Aging at 135°C after 168h)

ASTM D 638

%

%

290

85

Volume Resistivity at 20°C

Volume Resistivity at 90°C

ASTM-D991

W.cm

W.cm

20

≤ 200

Hot Set Test Conditions

At 200 ±2 °C x 0.2 MPA for 15 min

IEC 540-14



Elongation after loading

Permanent Deformation


%

%

≤ 60

≤ 2

Moisture Content

KARL FISCHER

ppm

≤ 500

Brittleness Temperature

ASTM-D746


-40°C

4. Processing Conditions

The recommended standard extrusion temperature profiles are as followings--------------------------------Unit: °C


Zone

Zone 1

Zone 2

Zone 3

Zone 4

Flange

Tube

Screw

Temperature Range°C

85-90

95-100

105-110

110-115

110-112

110-115

65-70

We suggest using double layer filter mesh with size 40 mesh (350μm).

We recommend hopper drying at 40~60'C for 4 hours to remove moisture before extrusion.

5. Storage

Should be stored at room temperatures between 10~30°C. Recommended maximum storage period in dry and clean are

is 12 months unopened and in original packaging after the manufacture.


Inquire Now
Name: *
Mobile:
E-mail: *
Message: *
Verification code: *
  
Other products
Hot products
CopyRight © 2020-2024   Jiangsu Reliable Industry Co., Ltd.  All rights reserved  Sitemap  All tags